Position the side of the gate to the post and the pivot point should be placed between the post and the gate.
Mounting gate hinges on block wall.
Masonry anchors attach nearly any type of gate hinge to a block wall.
By far the easiest of the gate posts to fix and supplied in the same material as your gates softwood gates then softwood fixing stiles etc so everything matches used for fixing to a wall or other structure and fixed by either frame fixings or masonry screws bolts.
Place the gate against the brick wall in the closed position.
Gate bolts and locks can make any area more secure and hard to access which is ideal for anyone who has young children pets or livestock.
Align the gate against the post so that the hinge mounting holes are centered over the bricks and not over mortar or partly over.
Bring the gate to an upright position and hold it in such a way that the hinges are parallel to the wall or post.
Have a friend or family member help you hold the gate while you place a bubble level on the front of it.
Hold the gate in position against the brick post on the hinge side.
Wedge anchors are a common choice.
Select a hinge that has screw holes on both sides such as a strap hinge.
Supports up to 30 lb 13 6 kg load.
Hinged panel mounting bracket can be mounted to open left or right and supports up to 30 lb load.
Mounting hardware not included.
How to fit gate posts to a wall.
They support heavy loads and require few tools for installation.
Hold the gate against the post line up the.
Some latches are key locking while others can simply be locked with a padlock or another device.
Position the gate so it stands plumb then swing the gate to the open position.
Attach two hinges to the gate evenly spacing them from top to bottom.
Use either the screws that come with the hinges or 1 inch exterior wood screws.
Available in 2 3 4 5 or 6 mounting space 1 75 h 44 45 mm 4 or 8 d 100 mm or 200 mm and 19 w.
Mark the mounting holes on the hinges onto the wall using a felt tip marker.
Place some blocks below the gate to lift it to the desired level.